Forum – For Sale
Want to buy or sell an etching press or a workshop? This is the place to announce it.
World Printmakers’ Print Workshop Central
Online resources for fine-art printmaking workshops
Pages
- 1-Announcing Print Workshop Central
- 2-How Print Workshop Central Works
- 3-Print Workshop Central Forums
- 4-News Releases / Articles
- 416 West Gallery & Print Center, Denison, Texas
- 5-Frequently Asked Questions
- 6-How Do We Sign Up?
- 7 – “No Giclee” News and Symbol Proposals
- 8 – Press
- Artists’ Press, White River, South Africa
- Atelier Meridian, Portland, Oregon, USA
- Atelier West, Newfoundland, Canada
- Australian Print Workshop
- Black Church Print Studio, Dublin, Ireland
- Center for Contemporary Printmaking, Connecticut, USA
- Chicago Printmakers Collaborative, Chicago, USA
- East London Printmakers
- El Lledoner, Viladamat, Girona, Spain
- Falu Konstgrafiska Verkstad / The Print Workshop in Falun, Sweden
- Fyns Grafiske Vaerksted, Odense, Denmark
- grafisk værksted \ NÆSTVED, Denmark
- Graphic Studio Dublin, Ireland
- Hampton Editions, Ltd., NY, USA
- Hong Kong Open Printshop, China
- Honolulu Printmakers
- Ink Shop Printmaking Center, Ithaca, NY, USA
- Josephine Press
- Leinster Print Studio, Co. Kildare, Ireland
- londonprintstudio, London, U.K.
- New Grounds Print Workshop and Gallery
- North Bank Studio, China
- Oaks Parks Studios
- Open Bite Australia Print Workshop
- Pomegranate Editions, Granada, Spain
- Seacourt Print Workshop, Bangor, Northern Ireland
- Squeegeeville, Courtenay, BC, Canada
- Taller El Lledoner, Viladamat, Gerona, Spain
- Underground Impressions Souterraines, Shawville, Quebec, Canada
- Wharepuke Print Studio, Kerikeri, New Zealand
- Zea Mays Printmaking, Florence, MA, USA
Images from Print Universe
- red horizon February 1, 2012by Allan Richardson collagraph on card
- arran February 1, 2012by Allan Richardson etching on steel
- A4 printmaking competition self-deception II ,dennis V H Andersen February 1, 2012by victor denis havmann andersen
Blogroll
printmaking links
- Artists' Internet Strategies
- El Gallinero, an artists' and writers' residence in Spain
- I Love Typography
- Indian Printmaking Collection
- Magical-Secrets: A Printmaking Community
- Maureen Booth
- Nik Semenoff’s New Directions in Printmaking
- Print Universe
- Printeresting
- Printmaking Courses in Spain
- Spanish Printmakers
- Spencer Museum of Art – Print Room
- St. Bride Library
- World Printmakers
- World Printmakers
- Yo! @ Ogilvy NYC
Tags
Share this blog
Copper plates and Etching paper for sale, San Diego CA
Rives, German Etching, Murilliio
Rod 619 561 5584
Rod Lingren
June 21, 2008 at 6:17 pm
Interested what do you have??What kinda of deal?? thank Stephen
stephen Duffy
March 17, 2011 at 7:15 pm
What size is the Rives? Are we talking Rives BFK heavyweight?
Catherine Ruane
December 24, 2011 at 7:16 am
We have downsized and moved. Surplus equipment
2007 model TMI jaguar 36″x48″ parallel lift one arm screen press, requires air, 110v, in great shape, very modern large format. $10,000 OBO
Older Solar 360 prototype vacuum exposing frame, approx 60″x80″ rotating model, works with conventional lamp or sun, $2800 OBO
52″x52″ 50 leaf drying rack, used, ok condition, $500
Buy all and we can make a deal. Delivery and setup negotiable. all prices FOB Courtenay, Vancouver Island, Canada – do not include crating
see the press vid at http://www.tmiscreenprinting.com in ‘news’ ph 250 334-2598 9am-5pm westcoast time or email andy AT squeegeeville.com
Andy MacDougall
October 7, 2008 at 4:40 pm
oh hai!
We have a brand new 47×57″ fluorescent UV tube vacuum exposing unit with floor stand sitting at our factory in a crate. the customer had a fire and can’t take it.
this is located in Mexico and ready to go, wired for 110v
Regular $3125, offered for $2500 plus shipping.
See it here: http://www.tmiscreenprinting.com/products/eagle-fluorescent/
andy AT timiscreenprinting.com
ALSO: I have 4 – 48×48 OD heavyduty aluminum stretch and glue frames – they won’t fit my new exposure unit or press. Some are ripped, some have half decent 225-250 mesh. $70 ea.FOB my studio, does not include freight or packaging for shipping.
ALSO: large newman roller frames (maybe 48×48″ or so) Some friends of mine in Langley BC (outside of Vancouver) ended up with quite a few – they have other sizes of regular frames too, they will sell them cheap. contact http://www.monsterpress.ca ask for Marty tell them andymac sent you!
Andy MacDougall
December 6, 2008 at 4:41 am
All the above have sold. We took in trade an older 3×4 one arm clamshell vacuum table, probably a cinicinatti, looks to be in decent shape,
a rotating Polycop vacuum exposing frame about 39″x 50″,
a smaller 50 leaf drying rack maybe 32×48.
All this is located in Victoria, make me an offer.
andy AT tmiscreenprinting.com i can send some pictures.
andy macdougall
February 21, 2009 at 9:43 pm
Hello,
I’m not sure if this is appropriate for this website, but here goes. My father, the artist David Larson, died 2007. I am liquidating art materials for my mom and among the items is a Martech Etching Press. This is a manual press that he dabbled with but did not use much. On the side is a plaque that reads, “This press was made for Alan Cutcliffe”. The company is out of business and this is one of only websites I’ve found that deal with such things. We are curious as to the value of this press and would appreciate any suggestions on finding a new owner.
Thank you. Anders Larson
Anders Larson
March 28, 2009 at 1:25 am
I am interested in puchasing your Martech press.I don’t know the value.It was designed by Joe Martin in Bayside NY.I grew up with his daughter and we used to deliver them all over NYC.
Jeri Parrott
October 21, 2009 at 6:41 pm
I have a Martech Press for sale. I am in Long Beach NY. The pressis motorized . The bed is 37″ x 52″
Reina
March 2, 2011 at 4:57 pm
Interestedin the Martech. Are there pictures?
Claudia
July 23, 2011 at 8:00 pm
I am a Maine resident and would be interested in seeing your Martech press, and possibly buying it. What size is the bed?
I’ve been looking for a press for a long time.
Thanks
georgina Grenier
November 15, 2009 at 5:59 pm
Please let me know if you are still interested in the Martech Press. Thanks, dave, (516) 376-1600 davescyberstore@aol.com
Dave
January 9, 2012 at 1:17 am
Please could you let me know if you still have the Martech etching press available?
Thank you
Georgina Grenier
Georgina Grenier
November 15, 2009 at 6:18 pm
Do you still have the press?
Mr Larson
December 8, 2009 at 10:25 pm
Hi – I see by the date that you posed this a while ago, but do you still have that Martcech press and if so – what size is it (bed dimensions), where is it and how much do you want for it?
john
October 2, 2011 at 2:44 pm
Hi John,
I am reina’s son. Yes – Press is still avaliable.
The bed is 37″ x 52″. It is in Long Beach, NY
Jordan
November 16, 2011 at 12:26 am
DO YOUE STILL HAVE THE ETCHING PRESS FOR SELL.? let me know .
helio salcedo
December 24, 2011 at 3:16 am
Please let me know if you are still interested in this press. Thanks, Dave (516) 376-1600 davescyberstore@aol.com
Dave
January 9, 2012 at 1:19 am
Dear Anders,
Where is the press? Can you send photos? What size is the bed? Thanks.
Sincerely,
Greg Olsen
Calgary,AB
Greg Olsen
March 31, 2009 at 6:48 am
Greg,
The press is in South Penobscot, Maine. I will be there in a few weeks and can get the measurements. If there is any measurement besides the bed size that you want, let me know and I’ll get it. If there are any other dimensions or information that you’d like, please ask. This is definately not my area of expertise.
Anders
Anders Larson
April 2, 2009 at 3:21 am
Would also like to know the size of the roller and pressbed, if it has a gearbox on the side, and any idea of price, plus some pix. Thanks.
Steve H.
May 19, 2009 at 9:39 am
Greg,
I will be visiting Penobscot on the weekend of June 6/7 and I’ll photograph and measure the press and pass this along to you. Thanks for your patience, I thought I would have gone there by now but plans changed.
Anders
Anders Larson
May 23, 2009 at 6:18 pm
Martech Etching Press update:
Sorry for the delay, but here are some numbers.
Large laminating plate is 17″ by 32″ by 3/4″
The top roller is 16″ by 5 1/2″ diameter
Bottom roller is approx 4″ diameter
The crank arm for the gearbox is 7″
I also have three 17″ by 32″ felts, 2 large tubs, 4 containers of etching ink, and a collection of etching tools. I have several photos and will send them to you upon request. My email is alarson@sanford.org. I am still trying to find a fair value for the press, and I welcome suggestions.
Anders Larson
June 13, 2009 at 3:02 pm
All of the above screenprinting equipment I listed has been sold. thank you!
andy macdougall
July 24, 2009 at 6:54 am
Hello,
I have the press of my late husband for sale.
It’s a DICKERSON COMBINATION PRESS,
motorized, model 002,
Press printing bed is 27″ x 48.
It sits on a metal table about 2ft of the ground. it looks exactly like the one here – 4th pic on the bottom :
http://www.chicagoprintmakers.com/docs/facilities/facilities.php
I have all the leather rollers, plus even color pigments.
If any of you could guide where I can find out it’s value I’d greatly appreciate it.
Thank you so much for your help,
Gabriele
Gabriele Pallin
September 17, 2009 at 1:41 am
Sorry the above measurement are incorrect.
DICKERSON COMBINATION PRESS,
motorized, model 002,
Press printing bed is 28″ x 64″.
Gabriele Pallin
September 18, 2009 at 4:57 am
DID YOU EVER SELL THIS PRESS?
DEBORAH GOODMAN
October 7, 2009 at 3:39 am
Hi Gabrielle,
Did you sell this press?
Thanks,
Gene
Gene
August 26, 2010 at 5:25 am
Did you sell your press?
ann
October 26, 2009 at 4:33 am
Please could you let me know if you sold this press
Thanks
Georgina Grenier
November 15, 2009 at 6:06 pm
Hello,
I have noticed that you are looking for Martech etching press. We have one that we would like to sell: 21 x 44 in . printing bed 21 x 44 in.
If you are interested I will send you photos.
best wishes
Gregory
Gregory
November 25, 2009 at 1:11 am
Is the Dickerson combo press still for sale & where is it located if so…I live in the NY area…
Jim
January 27, 2012 at 7:04 am
I just got a notification about this in my e-mail; where are you located and how much?
best wishes
Georgina
Georgina Grenier
December 15, 2009 at 2:20 pm
Dear Gregory,
Did you sell your 21 x 44 in Martech etching press? If it is still available, how much are you asking for it? How much does it weigh? (I live in CA.)
Sincerely,
Kathleen
Kathleen Biersteker
March 21, 2010 at 4:50 am
Fine Art Printmaking Shop Equipment for Sale – Equip your studio!
December 24, 2009, need to sell ASAP
ELEPHANT ETCHING PRESS for sale. Create original prints! Bed size: 30 by 52 inches Excellent condition.
Elephant Etching press, treasured art studio equipment, use to create etchings (intaglio), monoprints, collographs, block prints, all kinds of artwork requiring pressure and a large bed surface.
Drying Rack-50 Shelves, Drying Rack size 42″ x 50″
Water Table – top size 40″ x 52″ height 37″
(fill with water, hose attached,) Table has screen that fits snugly into lip to allow soaked paper to drip off excess water. Shelf underneath holds lots of etching and monoprint supplies, also hot plates, chemicals
Printmaking Supplies
Everything you need for a printmaking studio! Create great artwork as a profession or hobby. I used this equipment to make art in a successful business. Would be excellent for use in a school or University. This equipment will last you a lifetime.
I am a recent cancer survivor. Due to foreclosure and needing to move immediately I am unable to keep my treasured art studio equipment.
I hope to get a good offer on this equipment. I am selling the whole studio as a package deal. I’ll take the best offer. I will send you specs and details on the equipment and photos of the etching press, drying rack and water table. Please send a request to sarahdeesart@mac.com
and provide an Email address where I can send the information.
my web site is http://www.sarahdees.com
Thank you!
Sarah Dees
December 24, 2009 at 4:47 am
I’m looking for a used etching press. I live in CT. Does anyone know where I can find one?
Rebecca F
January 31, 2010 at 11:23 pm
Hi Rebecca, I have a Dickerson combination press that is motorized, it has hardly been used. If you are interested give me a call and I will give you the particulars. I am in Westchester NY 914 316-6156
Thanks, Noel D
Noel DeGaetano
April 9, 2010 at 8:30 pm
Hi Noel,
Just came across this…Is your press still for sale?
Please let me know details. I’m also in CT.
Thanks,
Gene
203-788-9803
Gene
August 25, 2010 at 4:15 am
I have a Martech etching press, motorized, bed size, 37″ X 56″. I live in Nassau County in NY. Are you interested in the press?
Reina
December 20, 2010 at 3:49 am
I have a Martech with a 37″ x 52″ bed. Please let me know if you are still interested in this press. Thanks, Dave (516) 376-1600 davescyberstore@aol.com
Dave
January 9, 2012 at 1:21 am
I have a 36 x 60 motorized Laguna etching press for sale. $6,000, obo. 110 v Includes a mixed set of blankets. (Not all full size.) Prints well. I have retired, and am giving up my shop, so I need to sell the press, along with a 69×45 drying rack with 50 spring loaded shelves. $1,350. All Located in the Olympia, WA area.
Larry Taylor
eltay3@yahoo.com
360-229-3952
Larry Taylor
February 11, 2010 at 1:16 am
Ettan MS-3 etching press, 1 owner, private studio, 24 by 48 inch bed, in good, clean condition. This manual press includes a captain’s wheel instead of a handle or starwheel, so is much easier on the wrists and back. Fairly lightweight at about 280 pounds makes this press transportable. $2800> Buyer assumes all shipping & crating costs
J Hasenfratz
February 28, 2010 at 2:14 am
Where are you located and can I see an image of your press and equipment? Thank you!
melanie yazzie
March 12, 2010 at 12:17 am
Hi, I am selling a Large Ettan… the floor model… the press you have for sale is actually the one I wanted… want to swap??? ha! anyway, just wondering if you have sold it yet… if not, and if I get lucky enough to sell my own… I Would be interested. `Anthony
Anthony DiMichele
March 17, 2010 at 12:42 pm
Where are you located? I am in Monterey CA
Kathleen Biersteker
March 18, 2010 at 8:20 pm
Where is the Ettan MS-3 etching press located? I am in Monterey CA
kathleen biersteker
March 19, 2010 at 5:33 am
Where is the Ettan press located?
Lorraine
April 12, 2010 at 6:30 am
Is the press still available? Where are you located?
Alan Vlach
April 15, 2010 at 5:16 pm
Do you still have this press available? It’s been a long time since I checked out this web site. Just wondering if you still do and where you are shipping from?
Rebecca Fettig
October 18, 2010 at 3:32 am
I have a large floor model Ettan Etching Press in great condition. Its bed is 36″ x 72″. It has 2 good blankets, a plexiglass bed cover.
It is simply too large for my studio. It cost 8000$ new, and I am asking 4500$ plus all shipping and crating costs.
If interested leave a reply. This is a great deal for anyone with a large studio, or who runs classes. It is a primo press. Also, it requires double door to move it into a room.
Anthony DiMichele
March 17, 2010 at 8:51 am
Hi Anthony,
Is this press still available? Where is the press located, and what is its weight? Any other details, pix?
Thanks,
Gene
emarinoiii@gmail.com
Gene
August 25, 2010 at 4:17 am
Hi Anthony, I just saw your ad for the large floor model ettan press, did you sell or it trade yet? Where are you located, I’m interested. Thanks. please reply to : ron.garrett@pinecrest.edu
Ron Garrett
November 28, 2011 at 5:00 pm
I have a Rembrandt Etching press. Press bed is 24×42. It is newly refurbished. It is bolted to a hardwood table with shelf on wheels. I will sacrifice for $3200. My email is debbiepatten7@yahoo.com if interested. thanks
Debbie Patten
April 11, 2010 at 5:54 am
Where are you located?
Lorraine
April 12, 2010 at 6:29 am
Hi Lorraine, If you are asking about the Dickerson Press, I am locvated in Westchester NY
Noel DeGaetano
April 12, 2010 at 3:51 pm
Do you still have this Rembrandt press?
Rebecca Fettig
October 18, 2010 at 3:34 am
thanks Noel…i live off the West Coast of Canada…
Lorraine
April 12, 2010 at 4:04 pm
I am looking for a good quality small/medium sized press for monoprints. Tabletop press would be ideal. I need one that has good control so that the pressure is even. I am located in San Diego. If anyone knows of one please let me know. Thanks!
Sharon
April 17, 2010 at 1:57 am
I am looking for a good quality small/medium or tabletop printing press for monoprints. I am in San Diego area and am looking for a reasonably priced press with in good condition with good control. I am in the San Diego area. If anyone has what I am looking for please contact me. Thanks!
Sharon
April 17, 2010 at 3:16 am
I’m searching for a large tabletop or medium standing etching press in excellent condition. I’m in the Seattle area, but would willingly pay shipping costs for the right press. Thanks.
Kristi
April 18, 2010 at 6:52 am
Hi, I just popped a posting regarding a Glen Alps printing press that my mother-in-law, a retired artist, wants to sell. I’m not sure if that is what your looking for, but these are rare presses and it is an etching press. The measurements are as follows: the metal bed is 30 by 66 and the wheel’s diameter is 18in. It is heavy and orange and metal. I think it would be typified as medium, but I’m not an artist, so apologies for any errors. She is asking $5,000 or best offer. Thanks, Elizabeth
Elizabeth
April 23, 2010 at 8:14 pm
I think it would be too big for me. They are supposed to be great. Where is it located?
Thomas Potts
April 23, 2010 at 9:08 pm
Hi Kristi, I have a Dickerson combination press, it will print etchings, monoprints and lithographs. The bed is 27×46″ and it is motorized. It is in great condition – send me your email and I can send you some pictures of the press. I would like to get $2,700. for it. 914 316-6156
Thanks, Noel
Noel DeGaetano
April 18, 2010 at 2:39 pm
I have an Ettan Etching Press, MS-3 for sale.
$2,000.00 Welded steel stand,blankets, brayers, etc. included.
Located near Medford, Oregon
Stacey Dawkins
April 18, 2010 at 7:38 pm
Hi there… about the Ettan. I live on Vancouver Island. How much does your press weigh? and do you know the dimensions of it? thank you. Lorraine
Lorraine
April 18, 2010 at 10:14 pm
Hey, I live in Marblehead, Ma. Looking for a good etching press. Not to be big or small. Need blankets – rollers – setting up studio. Thanks, Connie
Connie
April 23, 2010 at 5:02 pm
Stacey, Could you send pictures & history. Thanks, Connie
Connie
April 23, 2010 at 5:05 pm
I am looking for a small to medium etching press located on the east coast. I am in Asheville, NC, have truck, will travel. Thanks for your time and consideration.
Thomas Potts
April 18, 2010 at 11:55 pm
I am looking for a medium sized gently used manual etching press (vintage, or newer) press and live in Maine. Can pick up in New England, New York area. Anyone have one to sell?
Jann
April 20, 2010 at 6:59 pm
Jann,
Have you had any luck locating a press? I don’t know where you live but if it was close enough, would you consider going in on a press?
Thanks
Alan Vlach
May 25, 2010 at 1:15 am
i have a martech press, 32 x 51 good condition, i am semi-retiring,, long island ny
esteban
August 26, 2010 at 1:10 am
hi esteban,
is your press still available? if so how much are you asking for?
thanks.
fumi
p.s i am in nyc
fumi
November 4, 2010 at 9:03 pm
Lorraine: Bed: 24″x48.75″x.75″.Upper roller 6″ diameter. Without the stand it weighs 170 Lbs.
Stacey Dawkins
April 20, 2010 at 7:38 pm
who is the manufacture ? Where located? How much? Thanks, Tom
Thomas Potts
April 20, 2010 at 8:05 pm
Hi Stacey;
Thank you for your reply. We have a few questions:
1. How old is the press? Are you the original owner?
2. What condition is the bed in?
3. Why are you selling it?
4. How much was it used?
5. Do you think we could get in in the back of a pickup truck?
Lorraine
April 21, 2010 at 4:32 am
Is this press still available? How much?
Travis Grant
February 19, 2011 at 5:23 am
Tomorrow, I am Going to look at a Sturgus C4 Press, It is not complete. Any suggestions on how to evaluate condition would be appreciated. This is my first effort to buy a press. Thanks,
Thomas Potts
April 20, 2010 at 8:11 pm
Still Seeking Small to Medium Etching Press on East Coast. SE preferred. Thanks,
Thomas Potts
April 23, 2010 at 4:32 pm
Hi Lorraine,
I had the press made at Ettan in San Diego in 1993.
I used the press from then to currently.
I’m selling it because I’m “Old, weak and feeble” and down sizing. ( It’s a great press)
Yes, you can get it in a pick up easily, bed included.
Stacey
Stacey Dawkins
April 23, 2010 at 1:35 am
Hi Stacy,
Have lined up freight rates, have you sold your press?
Thanks,
jann
April 23, 2010 at 6:35 pm
Hi Stacy,
If you haven’t sold your Ettan Press, I’d like to know if you might sell it if I arranged shipping… I have started into searching freight rates for 170 lbs. Can you estimate the weight of the other items you’re including?
Jann
April 23, 2010 at 2:52 am
Hi Tom — Check ebay, there is a great seeming med/small press currently at auction. It is located in Florida. Good luck.
Jann
jann
April 23, 2010 at 5:08 pm
Thanks, But not what I am looking for. I am looking for a standard etching press, 2 rollers, prefer at least 4″ top roller. Size over 12″. Table Top would be fine. Not to exceed $3,000 price dependent on manufacture, size, condition. etc. This will be our first, want to buy one that we will be happy with for a long long time. Best Tom
Thomas Potts
April 23, 2010 at 6:21 pm
Hi Tom, I still have my press, a Dickerson- will handle etchings, mono prints and lithographs. It has a 27×46″ bed and it is motorized with very few hours on it. It also comes with blankets, new rainbow rollers and the table it sits on. I am just outside New York City. I was asking $2,700. My number is 914 316-6156. I can send you some photo’s.
Noel
Noel DeGaetano
April 23, 2010 at 5:24 pm
HI Noel: Thanks for your reply. We are looking for manual etching press a bit smaller, with geared crank. Liked at your web site looks like you are doing some interesting things. Best Tom
Thomas Potts
April 23, 2010 at 6:48 pm
Hi Noel,
Is this press still available?
Thanks,
Gene
Gene
August 26, 2010 at 4:53 am
Jann,
I have no idea how much the steel stand weighs.
GUESSING maybe 65 lbs. It is 29″W, 26 1/2″ D, 32″ H.
I have assorted brayers and blankets, again I have no idea how much they weigh, guessing again at 20lbs.
Hope this helps you. Stacey
Stacey Dawkins
April 23, 2010 at 7:56 pm
Thanks for this information, Stacey. I would need to have a shipping service crate and ship — so, can the legs be removed from the stand to make the shipping easier? Also, do you have a date in mind for selling — I guess I mean, is it available now?
Thanks again, Jann
jann
April 23, 2010 at 9:13 pm
Lorraine,
Noticed that I said “bed” not stand, sorry, Stacey
Stacey Dawkins
April 23, 2010 at 7:57 pm
Connie,
I don’t know how to send the picture on a computer, but if you go to Ettan Etching Press maybe they will show a picture of the MS-3 (mine has a crank handle)
Stacey
Stacey Dawkins
April 23, 2010 at 8:02 pm
A little provenance… how old is the press, single owner & condition. Reason for selling. Questimate shipping cost.
Thanks, Connie
Connie
April 23, 2010 at 10:57 pm
Stacey,
Reviewed previous requests made for same info.. no need to repeat. C.
Connie
April 23, 2010 at 11:20 pm
Yes, there is a picture of this press on the Ettan website.
Lorraine
April 24, 2010 at 3:11 am
Jann,
The stand is welded steel, legs can’t be removed for easier shipping, sorry. It is available currently.
Stacey
Stacey Dawkins
April 24, 2010 at 5:35 pm
Thanks Stacey, that’s helpful information. Let me come at this another way: can the press and bed be removed from the table? In an ideal world, I would like to have the table… but shipping it doesn’t make sense given that I can mount the press on a table here. The stated weight of the press at Ettan site is 280 lbs. Your estimate for the press is 170 lbs. Was that a guess, or the press minus the table weight? I just need to give the shippers a weight to get a cost for shipping. Many thanks for your help with this.
Jann
jann
April 24, 2010 at 9:56 pm
Hi Jann,
My error, 270 lbs is what the brochure says.
e-mail: arndwk@aol.com if you like.
Stacey
Stacey Dawkins
April 26, 2010 at 7:32 pm
Hi Stacey, thanks for your help, though all to naught — the shipping and crating is prohibitive from Oregon to Maine. If I was closer, I would take you up on the purchase. I’m disappointed, and sorry if this is a disappointment to you. Again, thanks– Jann
jann
April 27, 2010 at 2:21 am
I am still looking for a small/medium sized manual (gear crank) press in good condition. I’m in the San Diego area. I am willing to travel a reasonable distance to pick it up.
Thanks!
Sharon
Sharon
April 27, 2010 at 1:34 am
Jann, I was concerned that it might be very expensive to ship that distance. Sorry..
Stacey
Stacey Dawkins
April 27, 2010 at 7:31 pm
Still looking for used press on east coast. Thanks Tom
Thomas Potts
May 8, 2010 at 5:04 pm
Thomas,
Are you still looking for a used press on the E. coast?? If so you can call me at 732-263-1121.
Doug
September 20, 2010 at 8:05 pm
Hi,
Have the following available:
Atlas Drying Racks
Tray size 52 x 69 inches
Great condition
$600.00
Light Table
8 x 5 feet ½ inch glass top
White plexi under the glass
Handmade Redwood
$600.00
Light Fixtures
13 8 foot 4 bulb units (with bulbs) $50.00 each
2 8 foot 2 bulb units (with bulbs)
Douthitt Heavy Duty Direct Method Screen Vacuum Frame
85 x 144 inches (glass dimensions)
Like new
$5,000.00
NuARC 6,000 Watt Instant-start Metal Halitde Light Source
Like new
$1,000.00
Oil Base Ink
(many never opened- posters, enamels, all purpose)
Naz Dar, Colonial, Advance
$25.00 per Gallon
Aluminum Screens
59 x 72 inches
7 137 mesh
4 175 mesh
5 230 mesh
4 305 mesh
$50.00 each
Magnesium Screens
66 x 90 inches
1 60 mesh
1 110 mesh
2 137 mesh
5 149 mesh
4 180 mesh
4 230 mesh
$75.00 each
Magnesium Screens
74 x 125 inches
7 140 poly mesh
3 180 poly mesh
$100.00 each
Poplar Screens
63 x 73 inches
8 140 mesh
6 180 mesh
6 230 mesh
5 305 mesh
5 390 mesh
$25.00 each
Thank-you,
Lois
May 10, 2010 at 9:59 pm
I am interested in your 52 x 69 drying racks. Could you please contact me at the email address above or by phone at 770-656-3299
Alan Howell
June 2, 2010 at 9:16 pm
Lois, where are you located?
Kelli Sincock
May 17, 2010 at 6:46 pm
Hello,
Port Washington, Long Island, New York.
Thanks,
Lois
May 18, 2010 at 1:56 pm
Hi Lois, I know this post is 2 yrs old now but was wondering if you still have any of the supplies you were selling? I’m starting a home studio & need some of the items you had listed. I need a vertical etching tank if anyone reading this has one for sale as well as items one would encounter making the jump from a small etching press to a large etching press. In other words…help! LOL! Jim
Jim
January 29, 2012 at 5:53 am
Looking for an etching press. I live in Maine and will travel a reasonable distance.
Thanks
Alan Vlach
May 25, 2010 at 1:13 am
My neighbor has a Martech etching press, similar or identical to the one described on this board about a year ago:
Martech Etching Press update:
Sorry for the delay, but here are some numbers.
Large laminating plate is 17″ by 32″ by 3/4″
The top roller is 16″ by 5 1/2″ diameter
Bottom roller is approx 4″ diameter
The crank arm for the gearbox is 7″ ”
I have inspected the press, which belonged to her late mother who was an excellent printmaker, and it appears to be in good condition. As a printmaker, I offered to help my neighbor find a new home for the press. I have yet to figure out a reasonable price for it. Any suggestions on a price would be most welcome.
The press is in central NH. Please get in touch with me if you would like more details
Peggy Merrtt
Margaret Merritt
June 3, 2010 at 6:33 pm
Hi Peggy,
I am looking for a press, and am in Maine. I have seen used presses of this size online, asking somewhere around the $1800- $2400 range — depending on condition, with the understanding that buyer is responsible to pick up. Takach sells used presses sometimes — so might be a price guide there. New press prices generally set the market, but then are generally shipped to the buyer. Hope this is helpful. Jann
jann
June 4, 2010 at 8:17 pm
Do you have any pictures of the press? Does it include any blankets, etc.? Have you determined a price yet?
Thanks
Alan
Alan Vlach
June 4, 2010 at 12:26 pm
Re: Marteck etching press. My neighbors are away for the weekend. I will take some photographs at the beginning of the week and send them to interested people as well as give more specifics including blankets.
Let me know by e-mail (peggymerritt@gmail.com) if you would like additional details.
Margaret Merritt
June 5, 2010 at 8:57 pm
I have a .25 inch cushion blanket, used 3 times and measuring about 30 x 40 inches. It is very clean and has no dents or squashed areas. I live in Maine.
Georgina Grenier
June 4, 2010 at 1:07 pm
I am open to trade a Chandler & Price platen letterpress for an etching press having at least a 16 inch or more in width top roller. The platen size on the C&P I have is approximately 14 3/4 x 9 1/4 inches; I have two chases; the inside width of the chase is 8×10 inches. I am located in the Ohio valley. I am not interesed in selling this press but would trade only for an etching press as specified above.
Martin Resnick
June 4, 2010 at 7:58 pm
Hi, I am located in Brooklyn Ny and I am looking for a small table top press, or medium sized press. Plus I am looking for any used equipment for a printmaking studio. If you have any or all of this and are looking to sell it, please contact me. This is for a small liberal arts college in Oakdale NY. Thank you.
Jason Mones
Jason Mones
June 6, 2010 at 8:47 pm
i have a martech 32 x 51, the bed is in good shape
esteban
August 26, 2010 at 1:13 am
Charles Brand 28 x 50 Very good condition
Blankets, inks, rollers, paper
C&H Advantage M48A Matt Cutter (48″) with table
Flecher Terry 48″ glass cutter
St. Petersburg Florida
Offers
Bob Steward
August 10, 2010 at 3:39 am
Hi,
How much are you looking to get for the Brand etching press?
Thanks,
Gene
emarinoiii@gmail.com
Gene
August 20, 2010 at 10:50 pm
Is the Charles Brand press still available?
Travis Grant
February 19, 2011 at 5:34 am
Yes. It is still available.
Bob Steward
February 20, 2011 at 6:07 pm
hi Bob: do you still have the press?. let me know.Iam interesting in buy a press.
helio salcedo
December 24, 2011 at 3:44 am
If the Brand is available please contact me with price
Francisco
December 24, 2011 at 3:48 am
Bob, have you sold the Brand Press? I’m interested and I live in Florida. ron.garrett@pinecrest.edu
Ron Garrett
December 24, 2011 at 5:04 pm
BOB:Do you still have your Charles Brand press to sell.I.am very interested.
helio salcedo
December 29, 2011 at 3:01 am
Would like to purchase etching press capable of printing a full size sheet of paper. Please send information on name of press, dimensions, age, etc. and asking price. We live on Vancouver Island off the west coast of Canada and would like to know where the press is located. Thanks!
Lorraine Douglas
August 12, 2010 at 12:43 am
We have new etching presses for sale. Pls kindly browse our page http://www.flickr.com/photos/iggyycn/
Bed size(mm) Weight (kg)
40*80*0.8 65
50*90*0.8 75
60*110*1.6 350
70*150*1.6 440
80*150*1.8 480
* Delivery time: about 30days
* Larger size is available at request.
Best regards,
Anny / KINGSTAR
Anny
August 25, 2010 at 6:36 am
I need a medium sized etching press that is suitable for block printing and monotypes as well. It will need to be shipped to Chiang Mai, Thailand. Can you help me and what can you offer. Sizes, prices and transport costs. Thanks for your help.
Tony
September 20, 2010 at 11:05 am
Looking for a table-top press (12″ x 24″ print area max) around the West Coast. I will be driving from Southern California to Southern Washington this week and hope to pick it up. Live in N. Cali or Oregon? Give me an email directly at: Rick@BooneArts.com. Thanks!
Rick Boone
August 16, 2010 at 9:44 am
We have new etching presses for sale. Pls kindly browse our page http://www.flickr.com/photos/iggyycn/
100%brand new quality etching press with reasonable price.
Bed size(mm) Weight (kg)
40*80*0.8 65
50*90*0.8 75
60*110*1.6 350
70*150*1.6 440
80*150*1.8 480
* Delivery time: about 30days
* Larger size is available at request.
Best regards,
Anny / KINGSTAR
Anny
August 24, 2010 at 5:01 am
Anny:
How much does each press cost with out shipping?
How much would the 60*110*1.6 cost to ship to New York City?
Diana
September 16, 2010 at 3:20 am
Hi, Diana!
We sold one set of etching press 60*110*1.6cm to New York last month. Now arrived. The unit price(including shipping and insurance) is USD3,400.00/set. The machine is sent to customs warehouse firstly. You could take it to your house after declaration.
Could you inform me your email? I’ll send you price for each press cost without shipping.
Thank you!
Anny
September 17, 2010 at 2:49 am
Diana,
My email: iggyycn@gmail.com
Anny
September 17, 2010 at 3:20 am
Hi I live in NYC. I am interested in your press.
Can you send me a price list?
Thank you
fumikotoda@mac.com
2129207492
fumi
November 4, 2010 at 9:08 pm
Seeking a high-quality floor etching/intaglio press (Conrad, American French, Elephant, etc.) in good condition, preferably within driving distance of Boston or Lenox. Bed width 12-30″. Prefer motorized, but crank or wheel considered.
This will be a production machine; repeatable alignment is critical. Will pay fair market price depending on make, model and condition.
Al Norman
August 25, 2010 at 3:40 pm
Press located – thanks for help here.
-Al
Al Norman
August 31, 2010 at 2:43 am
Hi, Al!
Press locates in China. Could you inform me your location so that I could inform you the exact shipping and insurance. Thanks!
By the way, we sold two sets of etching press to US. For your reference.
Rgds,
Anny / KINGSTAR
Anny
August 31, 2010 at 2:49 am
Anny, Would you please email me your price list for the three smaller presses and cost of shipping to Chiang Mai, Thailand. Thanks, Tony
gonebeyond@hotmail.com
Tony
September 20, 2010 at 2:54 pm
ETCHING PRESS FOR SALE – $950 or BO
“Charles Brand” Etching Press with 16″ x 30″ steel bed. Sells new for $2,500 +/-. Located in NJ. Many zinc plates also available. Buyer responsible for providing all handling and moving.
Doug
September 23, 2010 at 6:24 pm
hi doug,
is your press still available?
i am in nyc
thanks,
Fumi
fumi
November 4, 2010 at 9:12 pm
Any chance your Charles Brand etching press is still available? Thanks, Sandra
Sandra
January 24, 2011 at 4:18 am
LITHO PRESS FOR SALE – “Charles Brand” Litho Press with 24″ x 40″ steel bed. Sells new for $6,500 +/-; Asking $2,500 or BO. Many litho stones also available. Buyer responsible for providing all handling and moving. Located in NJ.
Doug
September 23, 2010 at 6:25 pm
I looking for a gray stone size 24 x 36″ Do you have one?
I am located in NYC
Rica Bando
September 25, 2010 at 4:18 am
I am interested in your stones
aidanrumack@gmail.com
Thanks
Aidan
October 18, 2010 at 6:34 am
Do you still have this press for sale?
Maureen Moll
December 7, 2010 at 8:50 pm
Maureen,
Yes, it is still available. I can be contacted at dferrari@sica.org or by calling 732-263-1121.
Doug
Douglas Ferrari
December 8, 2010 at 7:32 pm
Studio closing.
Used presses for Sale:
Location: South Central Texas
Takach Litho 3460 press, bed size 33 1/2 x 72
7,000
Grinding sink, with carborendum
Stones also available, email for list and prices.
Lainey
September 25, 2010 at 12:18 pm
Please email me the stone list and price.
ricabando@me.com
best, Rica
Rica Bando
September 25, 2010 at 2:13 pm
Interested in stone list and grinding sink.
Thanks
Aidan
October 18, 2010 at 6:31 am
Interested in your stone list and grinding sink.
aidanrumack@gmail.com
Thanks
Aidan
October 18, 2010 at 6:33 am
Studio closing.
Used presses for Sale:
Location: South Central Texas
Takach Litho 3460 press, bed size 33 1/2 x 72
7,000
Grinding sink, with carborundum
Stones also available, email for list and prices.
Lainey
September 25, 2010 at 12:26 pm
Do you still have the Takach Litho press?
Tes Hodock
February 10, 2011 at 2:05 am
For Sale: Brand New Large Roller 21″ wide, 8 1/2″ diameter,
28″ roll out length. Never been used – $550. or best offer.
deborah277@mac.com Connecticut, USA
deborah weiss
September 30, 2010 at 3:27 am
What is the roller made of? What is the durometer of the roller? Thanks!
Deb
October 27, 2010 at 2:30 pm
Deb: Have you sold the wonderful press yet? I am in search of a press that has a bed under 24″ wide, but no less than 16″ wide if possible. I have an Ettan 24″W x 48″L in my studio, but am searching for a smaller & more portable size press for road trips & fairs.
Thanks Tons! Rick
Ric
April 14, 2011 at 11:21 pm
I have an Ettan MS-3 Etching Press for sale. Details are on the Ettan site at: http://www.ettanpress.com/page/etching_press.html
It is 24″ x 48″. I would love to trade for an MS12 plus $1700, or I will sell the press for $3000. Here’s your chance to upsize! I am moving to a smaller studio.
This press is 280 pounds and is located near Seattle. I prefer that the buyer will pickup.
mobile@foxfirejewelers.com
Michael Babinski
October 2, 2010 at 9:09 pm
My husband is looking for a used Dickerson Combination Printing press located somewhere near Greenville, SC. If anyone has one available, please let us know. Thanks!
Sue Whittington
October 6, 2010 at 5:11 pm
We have a Martech press, rollers,tubs and a large double steel sink. I’m not sure if inks, acids and paper are still useable.
Press Dimentions:
BED 32″ X 51″
HT 35″ 51″ TO TOP OF TOWER
Roller 30″
ari
October 10, 2010 at 4:56 pm
Is your press still available?
Travis Grant
February 19, 2011 at 5:41 am
ari: Do you still have the press for sell?.
helio salcedo
December 29, 2011 at 2:48 am
I am selling my ten year old Praga etching press: Heavy Duty E-24 with 24×40 inch solid steel bed plate, star wheel and rigid steel support base. Very lightly used and in excellent condition. Located in Northern Virginia (40 miles NW of Washington DC). $3000.
Specifications:
Rollers: 6 1/2″ diameter,
Bed plate (35″ height) 1/4″ x 24″ x 40″
Stand: 24″ x 25 1/2″
Weight: 450 LB
Maggie Siner
October 18, 2010 at 12:25 am
I have an etching printing press manufactured by J. Massey, Rome, NY. Table top. Bed size 12″x 24″. Drum 3 1/2″. Not sure of age but appears to be all there and working. Has not been tried as far as printing so no info on that aspect. Does have some oxidation of drum. Very heavy so will not ship unless arranged for by buyer. Located in Binghamton, NY. I may be able to deliver if your location is between Binghamton and Manorville, NY.
BoFed
October 25, 2010 at 6:54 pm
Re: tabletop etching press. I have family that might pick it up, though I live in CA. My wife teaches art to children with Autism and this would be a great addition. Please let me know how much. Rick@BooneArts.com. Thank you!
Rick Boone
October 26, 2010 at 8:50 am
Sorry No Longer available.
Bo Fed
November 1, 2010 at 12:59 am
I am looking for affordable used etching/relief and letterpress presses in working condition for a new cooperative printing venture in SE Wisconsin. This hopes to help young printmakers get started and create community outreach. minimum 24×48 bed preferred
Sam
October 31, 2010 at 9:09 am
Hi, Sam!
Etching press with 60*110*1.6cm bed asking $3300.00.(not incl. shipping and insurance)
Pls kindly check details on my page http://www.flickr.com/photos/iggyycn/
Email: iggyycn@gmail.com
Thank you!
Anny
November 1, 2010 at 2:36 am
Fine Arts Press to sell American French Tool Etching Press– $18,500 ($27,000 new)
Large floor model-Bed 48″ x 78″
Electric motor drive–variable speed control
3 new felt blankets included
Newly cleaned and conditioned
Location: SF, CA
American French Tool presses have the reputation of being the world’s finest etching presses. This is a real work horse. Utilizing solid steel rolls and heavy steel frame American French Tool presses are the only presses many printmakers will use to print exacting heavy pressure photogravure prints. This press can be used for printing etching, type high wood blocks, collographs, and monotypes. The press bed plate has carefully designed safety devices to prevent the bed from coming off the press. Almost the entire length of the press bed can be used.
michael
November 4, 2010 at 8:21 pm
Hi everyone…I’m looking for a 24″ tabletop press…preferably American French Tool or Conrad…please email if you know of a used one for sale…thanks, nick
Nick tininenko
November 11, 2010 at 3:49 pm
For Sale: Charles Brand Litho 36×50 inch power bed.
NuArc flip top vacuum plate maker 40 x 50
Over two dozen Very BIG stones and storage rack
Whole shop must go.
Call Robert Beck if interested 407 733 6097
Press located in Central Florida
robert
November 16, 2010 at 3:10 am
Hi Robert
I am looking for the gray litho stone size 24x 36″ .
Please email me to mrbando@earthlink.net
Thank you!
Rica Bando
Rica Bando
November 17, 2010 at 2:08 am
I have a Conrad Combination Press for sale in Western Connecticut. It is hardly used. The specifics are below. Let me know if you need more info. Price is $4000. (Current new price is around $6600.)
Thanks
Motor Drive Model C25 Combination Press
- extra long aluminum bed plate 27 X 54 X 3/4
- bed stops
- micrometer gauges
- all steel stand
- casters(two locking)
Kim
November 28, 2010 at 3:15 am
The press has been sold.
Kim
December 20, 2010 at 3:39 am
For sale –
Litho Stone 24 x 30
It is laminated and is 3 5/8 inches deep with 1 3/16 inches left before getting to the lamination seam. It is laminated to another litho stone. Looks between yellow to light grey. Graphic Chemical has light grey stones of this size listed at $1500 but I’d be happy with $600 if I don’t have to deal with shipping. A great deal! Stone is located in Western Connecticut.
Kim
November 28, 2010 at 3:44 am
FYI – I’ve decided to offer the stone for $400.
Kim
December 5, 2010 at 5:35 pm
Could you send me photos of stone? and descriptions about hair lines, iron stain streaks as any of the stone’s problems.
ricabando@me.com
Rica
Rica Bando
December 5, 2010 at 6:43 pm
I would love to buy a stone that size. Can you email me further info?
Maureen
December 7, 2010 at 8:31 pm
Maureenmoll@gmail.com
Maureen
December 7, 2010 at 8:33 pm
The litho stone has been sold. Thanks everyone!
Kim
December 12, 2010 at 3:48 pm
I have a motorized Martech etching press for sale. The bed size is 36″ X 57″It was built by Joe Martinf specifically for me.
Reina
November 28, 2010 at 7:38 pm
The bed size is 37″ X 56″. It is motorized, comes with 3 blankets and a lexan cover It was built by Joe Martin specifically for me. I paid $12,000 new. It is in Nassau County. Any reasonable offer will be considered.
Reina
December 13, 2010 at 9:04 am
Is this item posted for sale?
Reina
November 29, 2010 at 12:16 am
Yes—I want to sell my Martech Etching Press.
Reina
December 8, 2010 at 3:31 am
How big is it? Where is it? How much for it?
Deb Napple
December 8, 2010 at 1:01 pm
I too would like to know where the press is located? and how much you are asking?
Mary
December 13, 2010 at 4:12 am
The press is located in Long Island NY. No reasonable offer refused—Comes with blankets, rollere, etc.
Reina
December 20, 2010 at 4:03 am
Graphic Chemical K.U. Roller for sale.
14 ” long and 4 1/4 ” in diameter. Literally used twice and in new condition. Stored in original box in blocks.
From their website “50120 Hand Roll-up Roller – Graphic K.U. 14″ – K.U rollers are manufactured with a fibrous cover to carry ink like a leather roller, but clean up with minimal effort like a rubber roller.” Selling new for $271.00 plus shipping. Make a reasonable offer.
Kim
December 8, 2010 at 1:12 am
The KU roller is still for sale. I also have an older leather roller for sale, roller cuffs, and a large phenolic tympan. Make an offer for all. I have everything listed on Craigslist (with photos)
for $450 obo.
Kim
January 3, 2011 at 2:22 am
As you have probably noticed I am selling off my lithography studio. Besides the items listed prior, I also have:
1) “Classic” Korn’s litho pencils (from the late 1970′s, really!) I have #5 copal, #4 and #3. I also have a full box of 1/4″ Korn’s litho crayons #2.
2) Snake slips (full box)
3) Carborundum
4) Things I haven’t found yet probably…
Let me know if you’re interested
Kim
December 8, 2010 at 1:23 am
These items have been sold. Thanks!
Kim
December 22, 2010 at 7:12 pm
i would like to get a copy of the operations pamphlet
and a parts diagram for the motorized dickerson combination press.
howard
December 18, 2010 at 9:31 am
( e mail correction for dec 18th posting
howard
December 18, 2010 at 9:33 am
Hi Howard,
Contact Tom Conrad tom@conradmachine.com at Conrad Machine C0.
Their combination presses are the “heirs” to the Dickerson Press & a manual is probably either available or applicable from their current models.
Gene
Gene
December 19, 2010 at 1:00 am
Looking for used litho press and larger stone (minimum 20 x 26 in). Also, I have a leather roller that has reversed leather and had been shellaced before I stripped it. Does anybody know of someone who could re-cover the roller or turn the leather right side out?
Maureen
December 21, 2010 at 5:52 am
Hi Maureen,
I don’t know the answer to your question but I do have a 14″ leather roller for sale. It is older and was reconditioned by Graphic Chemical years ago. It has been coated and in storage since. I also have a KU roller for sale. (See my other post). It might be easier and cheaper for you… I’m looking to move these last few things. The last item I have is a phenolic linen tympan 24 X 36.
Kim
Kim
December 22, 2010 at 7:11 pm
For Sale: Ettan MS-18 tabletop etching press
18” x 36” x .50” laminated phenolic resin no memory bed plate. 18″ x 5” diameter top roller; 2.75 diameter Cr/Mo steel bottom roller. 90 lbs.
Excellent condition with no issues whatsoever; hobbyist use only for three years.
Asking $2100.00; buyer assumes crating/shipping costs or may pick up. Current new price from Ettan without crating/shipping is $3095.00.
Located in east central Florida off I95.
Thom Harrell
December 21, 2010 at 7:36 pm
Hello,
I have a Pelican press for sale, 24 inks in 1# cans, rollers, brayers, acid,tool,s felts, asphaltum, oil, and paper.
Lisa Lutz
December 23, 2010 at 11:47 pm
How old is the press? Where is it located?
Thanks
Deb
December 24, 2010 at 3:22 pm
Black Earth, WI, purchased new in 1978, not used. May already be sold to a school, awaiting financing.
Lisa Lutz
December 24, 2010 at 4:07 pm
Hi Deb, Just saw your comment on printworkshopcentral.com. You were asking about someones Pelican etching press for sale.This was Dec. 24, 2010. Are you still looking for a press? If so I have one. I have a Rembrandt Pelican etching press. press bed is 24×42. It comes with a solid wood table w/shelf & on rollers. I am asking $2800 for it. I live in Georgia.If interested I will email photos to you. Blessings, Debbie
Debbie Patten
January 26, 2011 at 5:12 am
Hi Lisa,
Samira and Kat here. We are still can’t wait for things to get worked out and to come get it.
I’ll be in touch very soon.
Samira
Samira
December 28, 2010 at 9:52 pm
My name is Yoshi Segoshi. I an a Tamarind trained printer and the founder of a workshop called “Edition Works” in Tokyo. Now I live in MA since 1995. I have a Takach made motorized litho press model 2648 with vari-speed and 25.5″ x 48″ backing plate.
http://www.takachpress.com/lithmotor/index.htm
I purchased it in 2001 and used it for about 2 years. It is in a perfect working condition with very minor cosmetic flows (minor ink stains and paint chips). I’ll send the photo of the press if you are interested.
I quit printmaking recently and moving on to painting. I’d like to sell this press for $5000 + shipping. The new one is priced as $18,170. The shipping cost should be less than $1000 within continental US.
yoshi
January 9, 2011 at 6:56 pm
Yoshi ~ I live north of Boston. Need a floor model etching press ~ in your circles do you know of any?
Thanks, Connie
Connie Vallis
November 16, 2011 at 2:02 pm
Hi,
I have etching chemicals, (gallon asphaltum, 2 carboundum gritFFF and one other grit size, 2 gallons etching ground, Inks: Graphic Chemical colors all one pound: Raw Sienna, 3 Etching black #514,Raw Umber #1717, Burnt Umber #603c,Yellow, Alizarian Crimson #2138,Dk Brown #545, Thalo Blue #1016, Cadmium Red light #1026, Thalo Green #2099, Unltramarine Blue #1017. Hanco Offset colors 1 1/4 pound: Benezidenne Yellow, Thalo(blue)Green,Thalo(blue)Red, OffsetRhodamineRed, OffsetFireRed, ThaloBlue. 1 qt burnt plate oil, 1 pound easy whipe, paper arches and bfk, a 6″ gelatin roller and a large rubber roller 18 x 6″ diameter, and some tools for sale.
Lisa Lutz
February 2, 2011 at 9:48 pm
Due to a serious illness, I am selling a lovingly used Takach 24″x 36″ table top etching press. m located in Southern New Mexico.
Sam Peters
February 9, 2011 at 12:26 am
I am interested, but am in CA. Give me a call at your earliest convenience. Rick: 714-914-8620
Rick Boone
February 9, 2011 at 11:07 am
I am interested in talking to you about this. Depending on the situation. I am opening a new collaborative studio soon.
Samira Gdisis
February 10, 2011 at 6:27 pm
Where are you located? Looking for a colaborative studio in New Mexico.
Tes Hodock
February 11, 2011 at 1:40 am
We are in Southeastern Wisconsin. If you are interested in talking about it please email 262-994-8780.
Samira Gdisis
February 11, 2011 at 4:49 pm
This comment is actually in reply to Tes Hodock who mentioned that she is looking for a collaborative studio in New Mexico.
Hi Tes – where in NM are you located? We’re in Magdalena, NM and hoping to have our collaborative printmaking studio open by April 4, 2011.
Contact me at ltg@gilanet.com for details if you are interested.
Laurie Gregg
March 1, 2011 at 5:24 pm
Have you sold the press yet? I’m interested.
Carrie Kaser
April 29, 2011 at 6:16 am
The press is still available. Where are you located?
I posted a short message about selling my press in February, but was too ill to reply to any responses, so I will try again. I wish to sell a lovingly used Takach Table Top Etching Press. Bed size is 24″x36″, which easily accommodates a full-sheet (22″x30″) of printmaking paper. E-mail or call me (575-382-3351) for more information. I am selling the press for $3,800 plus shipping and handling. I am located in southern New Mexico.
Sam Peters
Sam Peters
April 29, 2011 at 9:38 pm
I’am very interesting in buy your press,do you still have your press to sell?
helio salcedo
December 24, 2011 at 3:53 am
Hi, everyone!
We have brand-new etching press for sale
(price including packing, shipping and insurance):
TB-40 (bed: 40*80cm) @$1950
TB-50 (bed: 50*90cm) @$2150
TB-60 (bed: 60*110cm) @$3350
TB-70 (bed: 70*150cm) @$3650
TB-80 (bed: 80*150cm) @$3800
For more information and pictures, pls browse my page http://www.flickr.com/photos/iggyycn and email me. Thank you!
Anny
Anny
February 10, 2011 at 8:47 am
I am looking for a medium to large size etching press for a community print shop (at least 24″ wide bed). I live in Georgia but willing to travel. If anyone has anything let me know.
Thank you
Travis Grant
February 19, 2011 at 5:59 am
You probably already saw this if you live in Georgia, but just in case:
http://atlanta.craigslist.org/atl/tls/2239250858.html
Will your shop fit a 5′ x 8′ press?
Yosh
March 1, 2011 at 11:50 pm
Hi Travis,
I have a 37×52 Martech motorized press.
I am moving and must sell. It is in very good shape.
I live in NY -.
Best regards,
Jordan
November 16, 2011 at 12:37 am
DO YOU STILL HAVE THE ETCHING PRESS? I’am very interesting.
helio salcedo
December 24, 2011 at 4:30 am
I just graduated art school, live in Virginia and I am looking for a used tabletop press of good quality in a medium size. Ettan, conrad, Brand, American French preferably. Also if anyone out there has a press they love and suggest I would like to hear what it is and why.
sharon
March 4, 2011 at 11:03 pm
I just graduated art school, live in Virginia and I am looking for a good press. Preferably Ettan, Conrad, Brand or American French. If anyone out there has a medium size press they just love I woul like to hear what and why. Thanks!
sharon
March 4, 2011 at 11:05 pm
Sharon, if you can swing it, the Takach that is for sale by Karen Cunningham is a great press. I have been trying to get a lithography press from them. I don’t think you could buy a better one if it is in good shape.
Tes Hodock
March 9, 2011 at 6:54 pm
Sharon,
Our press is not bad choice as good as the mentioned brand. http://www.flickr.com/photos/iggyycn
If you like, I’d provide reference list to you.
Thank you!
Anny
Anny
March 10, 2011 at 2:48 am
I have a mint condition takach table top 24×48 press with 7.5 inch drum, 3 blankets,30×60 press bench with one lower shelf and castors for sale total $5,000.00 I am located in NYC.
Karen Cunningham
March 5, 2011 at 9:06 pm
Antique etching press for sale in Southern Vermont.
A. R. King MFG. New York
http://burlington.craigslist.org/art/2257915924.html
Josh: 802-867-4486
Josh Teresco
March 10, 2011 at 8:26 pm
Nice looking old press…has it sold? Thanks, Ric
Ric
April 14, 2011 at 11:30 pm
Josh:how big is the bed,if you still have the press to sell?.
helio salcedo
December 29, 2011 at 2:39 am
Looking for a used roller (mainly for Viscosity), 12″+.
Aaron C. Bass
March 11, 2011 at 10:12 pm
I have inks, rollers, asphaltum, grounds, and etchting needles and brayers for sale. I have larger roller too.
Lisa Lutz
March 11, 2011 at 11:39 pm
Is your large roller still available?
Deb
March 12, 2011 at 1:54 pm
Hi, Lisa. Have you sold off these supplies? Please let me know if you still have rollers and or brayers for sale. Thanks
Deb
April 10, 2011 at 3:15 pm
Roller for sale – never used 35 durometer
21″ wide 8 1/2″ diameter 28″ roll out length
450. (or best offer) + shipping
deborah weiss
March 11, 2011 at 11:58 pm
Hi Deborah– any guestimate on weight? I would like to be able to estimate shipping to Maine. Thanks, Jann
jann
March 12, 2011 at 12:37 am
about 25 lbs w/ packing approx.
I have a jpg if you would like
to see it.
deborah weiss
March 12, 2011 at 4:48 pm
the roller weighs about 25 lbs w/ packing approx.
I have a jpg if you would like
to see it.
deborah weiss
March 12, 2011 at 4:49 pm
Yes, a jpg would be great. Any more info, ie manufacturer – is this a rubber roller? do you also have solvent for cleaning the roller that you want to sell?
jann
March 12, 2011 at 6:28 pm
send jpg to boze88@aol.com, thanks.
jann
March 12, 2011 at 6:30 pm
Hi everyone,
I’m a postgraduate printmaking student at the University of Aberystwyth School of Art and have been lucky enough to secure a great working space ready for when I leave uni. I’m looking for a lithography press preferably from the UK because of shipping costs. Any information would be very very much appreciated.
Thank you,
Sarah Byfield
Sarah Byfield
March 17, 2011 at 1:11 pm
Hi Sarah,
As a fellow Lithographer, welcome. Have you thought of contacting Takach here in Albuquerque, NM to see if they are shipping anywhere over in your neck of the woods. Sometimes they have been known to piggyback shipments so it is more affordable. It is probably the most amazing press you will want to use. Good Luck.
Tes Hodock
March 17, 2011 at 5:35 pm
I’m looking for a table top etching press. Something smaller than 18″ wide. I’m in l.a.
thanks,
Harry
Harry
April 10, 2011 at 4:14 am
I posted a short message about selling my press in February, but was too ill to reply to any responses, so I will try again. I wish to sell a lovingly used Takach Table Top Etching Press. Bed size is 24″x36″, which easily accommodates a full-sheet (22″x30″) of printmaking paper. E-mail or call me (575-382-3351) for more information. I am selling the press for $3,800 plus shipping and handling. I am located in southern New Mexico.
Sam Peters
April 13, 2011 at 6:47 pm
How old is the press? Is it sold? Do you have a stand for it which you would be willing to sell? Thanks, Martha
Martha Slocum
May 10, 2011 at 6:49 pm
Hi,
Is your press still for sale. I am located in Massachusetts.
Thanks, Carolyn
Carolyn
November 15, 2011 at 1:27 am
Sorry, it is already sold. Thanks for your interest.
Sam
Sam Peters
November 16, 2011 at 1:58 am
I am looking to purchase a medium sized tabletop etching press. I’m in the Philadelphia area, can be reached at deb.Napple@gmail.com
Deb
May 10, 2011 at 2:49 am
Dickersen Combination press for sale. Press is 27″x48″. Motorized. There are felts, rollers, and an inking table 24″x36″. It is mounted on a table 3′x6′ (approx.) I purchased the press, used, in 1993. I don’t have a manual for it so I don’t know how old it is. I am in Chicago. email crosssticks@sbcglobal.net.
Pat O'Neal
May 20, 2011 at 9:48 pm
I am looking for an etching press, medium size, with or without stand. I live in Miami, FL but I will travel pretty far for a good deal. Thanks, Tim timothybuwalda@gmail.com
timothy
May 25, 2011 at 12:11 am
FOR SALE: Charles Brand Model E1630 (Floor Model), 16″ x 30″ bed, with micro dial indicator gauges. Press was purchased new in 1985 from Charles Brand. Press is in very good condition. I am located in Darien, CT.
I also have 2 Mayline oak flat draw files, 41″ x 27″ for sale.
Rich
June 20, 2011 at 3:43 pm
HI Rich, Is your Charles Brand still available for sale? Thanks, Scott
Scott Greene
December 31, 2011 at 2:48 pm
Rich,
How much including the flat files?
Thanks, Tony
gonrbeyond@hotmail.com
Tony Milton
June 25, 2011 at 12:16 pm
Tony,
Etching press $900.00
Flat files $600 for both.
Located in Darien, Connecticut.
Rich
Rich
June 25, 2011 at 2:50 pm
can you send photos of your etching press? timothybuwalda@gmail.com thanks, tim
timothy
July 22, 2011 at 4:34 am
I would take it now if I knew how to get it shipped over to Bangkok. Where and how far is the nearest major port to you? If you have pictures please post them. I really need something like this in Northern Thailand. If I can get it to Bangkok I can handle it from there. I’m about 400 miles north. I know this probably sounds crazy to you, but maybe we can work something out. Tony Milton gonebeyond@hotmail.com
Tony Milton
July 22, 2011 at 1:58 pm
do you still have the press? I would gladly take a road trip an get it. please send some photos to my email. timothybuwalda@gmail.com
timothy
July 28, 2011 at 3:48 am
Hi, I am looking for a high-quality floor model etching/intaglio press Conrad, American French, Elephant, or Brand New in good condition. Bed width 28″ x 48″ or larger.
If anyone knows of such a press for sale, I would greatly appreciate it! Willing to pick-up anywhere in USA. Willing to consider any price based on condition and availability.
Thank you
e-mail at khuffman216@gmail.com
Katie Rose
July 4, 2011 at 7:02 pm
Looking for a small printing press for intaglio and pronto plates located in San Diego.
Erica
July 15, 2011 at 5:26 am
We have a 13″ Dick Blick press in great shape with blankets for sale. Can be shipped bu UPS.
Jim
James Niss
November 22, 2011 at 5:44 pm
Hi,
I am working are downsizing my studio space and wish to sell my Glen Alps hand operated press.
Height 4’6″ Length 5′ – Steel bed 7/8x30x5’6″ -Bed is 36″ from the floor -Top roller raises 5″ maximum
Gear ratio is 4 to1. Heavy duty steel construction – top roller diameter 7.5″ bottom roller is 16″.
The color is the original orange with a brass plate noting Glen Alps press. This press a great press for a studio that teaches – Glen machine is built to last. The press is located outside of the Seattle, WA.
If interested I will send out detailed images and discuss price.
email – okeffe@gotsky.com
Thanks!
Christie Houston
July 21, 2011 at 8:47 pm
griffin series 0 etcing press for sale 12″ x 24″ bed $1,200
east coast (New Jersey) 609-417-0146
steverorss1@verizon.net
Steve Ross
July 27, 2011 at 5:09 pm
hi, i am very interested in your press. please send some photos to my e-mail (timothybuwalda@gmail.com). Best, Tim
timothy
July 28, 2011 at 3:46 am
Hi Steve, Is your Griffin still available for sale? Thanks, Scott
Scott Greene
December 31, 2011 at 2:52 pm
Looking for a medium sized etching press. Live in Northern BC. Please contact me by email. tnjlogan@gmail.com
Thank you!
Tabitha Logan
September 23, 2011 at 7:20 pm
I am looking for a medium sized etching/intaglio press. I live in Nova Scotia, Canada. Please contact me by email at the following: brushworks@gmail.com.
Thank you
Candice Dunn
September 26, 2011 at 8:33 pm
Dickerson Combination Press, motorized, for sale, $700. Press bed is 27″x48″. The press is mounted on a table 3′x6′.
There are felts and large rollers, as well as an inking table 24″x36″. I purchased the press used in 1993. I live in Chicago.
Please contact me by email at crosssticks@sbcglobal.net
Patricia O'Neal
November 15, 2011 at 8:00 pm
Patricia:
I live in WI and am interested in your press if it is still available.
I live in Kenosha and am not to far from you.
Thanks, Ric
Ric Berns
November 23, 2011 at 10:27 pm
It is available.
Patricia O'Neal
November 26, 2011 at 3:04 pm
I am interested in your press. Is it still available? I am located outside of Boston. Do you know what shipping might cost?
Thanks, Carolyn urchinz@comcast.net
Carolyn
November 26, 2011 at 4:26 pm
Looking to set up a press for a summer camp near Boston. We would like to buy a press with a larger size bed that is not motorized suitable for mono print.
Carolyn
November 29, 2011 at 3:08 pm
I have a DICKERSON Combination press, MOTORIZED, 28 X 64″ Benelex bed which does not warp like steel might. ONE Owner. They now go for over $4,000. new.
i would like to sell this press soon since having a stroke and don”t have use of my left hand at this time.
The press is located in Mount Ranier, Maryland,outside Washington DC. I am asking $600.00 or best offer.
PICK UP MUST BE WITH TRUCK TO A LOADING DOCK AND DOLLIES FOR TRANSPORT
I CAN BE REACHED via e mail: msmallwooo@aol.com
Michael Smallwood
December 9, 2011 at 11:37 pm
Do you still have your Dikerson press for sell? let me know.please
helio salcedo
December 24, 2011 at 4:07 am
Hello,
I am looking for a small to medium size etching used etching press. Preferably a Brand or a Takach. Anyone aware of one that is on the market? I look forward to hearing from you.
Thanks.
Catherine Ruane
December 24, 2011 at 7:21 am
Interested in your 30×50 Brand Press in St. Petersburg, Florida for sale, if you still have it? I live in Florida so location is good for possible pick-up, etc. Thank you kindly!
Ron Garrett
December 24, 2011 at 4:56 pm
For Sale: Ettan MS-18 etching press
18” x 36” x .50” laminated phenolic resin no-memory bed plate. 18″ x 5” diameter top roller; 2.75 diameter Cr/Mo steel bottom roller. 90 lbs.
Excellent condition with no issues whatsoever; moderate use only for three years.
Asking $1600.00; buyer assumes crating/shipping costs or may pick up. Current new price from Ettan without crating/shipping is $3095.00.
Located in Melbourne FL; off I95.
Thom Harrell
December 27, 2011 at 4:54 pm
Thom, do you have a photo of the press?
Catherine Ruane
January 1, 2012 at 9:37 pm
Thom, please contact me at clruane@yahoo.com. I am interested in the press.
Catherine Ruane
January 2, 2012 at 6:42 am
To Scott Green,
Please list your price for the Brand Press.
Thank you, Catherine
Catherine Ruane
January 1, 2012 at 10:04 pm
I have a Dickerson combination press for sale in queens ny
its a DC-2 with a 27″ x 48″ press bed, pictures are on craigslist
http://newyork.craigslist.org/que/art/2781409249.html
max dunlop
January 3, 2012 at 9:38 pm
its $3000
max dunlop
January 3, 2012 at 9:44 pm
Looking for a small table top etching press. Bed size between 12-16″ wide. Currently in Upstate NY. Would be willing to travel to pick-up. Don’t have the funds to get a high end model for my studio right now so looking for a used less expensive press. A Blick or Richeson would do fine. Contact me at mskinnr@yahoo.com
Thank you
Mark Skinner
January 13, 2012 at 7:02 pm
Looking to set up a press for a summer camp near Boston. We would like to buy a press with a larger size bed that is not motorized suitable for mono print.
Carolyn
January 15, 2012 at 9:41 pm
asking 2500 dickerson dc-2, 27×48, motorized, combo etching litho press.
http://newyork.craigslist.org/que/art/2803301462.html
in queens new york. I can crate and ship, but buyers must pay for shipping. I wish I could keep it, but i’m losing my space.
max dunlop
January 17, 2012 at 1:06 am
yes it is still for sale
max dunlop
February 2, 2012 at 9:08 pm
Looking to buy a press to set up for a summer camp near Boston. We would like to buy a tabletop press with a 20 inch or larger bed that is not motorized, suitable for mono print and etching.
Thanks send me an email urchinz@comcast.net
Carolyn
February 2, 2012 at 9:52 pm